1/2" Square x 8" Long High Speed Steel M2 Tool Bit

1/2" Square x 8" Long High Speed Steel M2 Tool Bit Reviews

Other Picture

1/2" Square x 8" Long High Speed Steel M2 Tool Bit Feature

• Size: 1/2"

Ground, high speed steel. MOLY toolbits are M2 H.S. steel-good general purpose.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 01, 2011 08:18:04

CROWN 1/2" Spindle Gouge

CROWN 1/2" Spindle Gouge Reviews

Other Picture

CROWN 1/2" Spindle Gouge Feature

• 1/2" spindle gouge
• CROWN Pro-PM tools will keep their edge for up to three times that of M2 high-speed steel

Powder metallurgy is not new to turning tools, but until now the available tools were expensive. Crown has succeeded in developing powdered metal tools that provide all the same benefits, but at a reasonable price. The advantage of these super-grade steels is that a tool retains its edge longer, a direct result of the steel being harder and tougher. Even the softest wood has an abrading effect on the cutting edge of a tool. The harder the steel, the better it resists this abrading and the longer they stay sharp. Even more important, they are at their prime in terms of cutting efficiency for far longer than their high-speed steel counterparts. Remember, all tools can be made equally sharp, it is the retention of a productive cutting edge that is the important factor. These tools will keep their edge for up to three times that of M2 high speed steel. What does all this really mean? Less sharpening, more turning, better cuts for a longer time! European ash handles. Honing required before use.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 31, 2011 01:32:04

Turning Tool Set, 8 pc.

Turning Tool Set, 8 pc. Reviews

Other Picture

Turning Tool Set, 8 pc. Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Includes 1/2" round nose, 1" square nose, 1/4" and 1/2" spindle gouge, 1/4" parting tool,
• 3/8" bowl gouge, 3/4" roughing gouge, and 3/4" skew
• Ash handles

This set has the 8 basic tools youll need for spindle and bowl turning. The 8 piece set includes 1/2" round nose, 1" square nose, 1/4" and 1/2" spindle gouge, 1/4" parting tool, 3/8" bowl gouge, 3/4" roughing gouge, and 3/4" skew. These HSS tools will keep a sharpened edge about six times longer than carbon steel and resist "blued" softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21".

Visit Store Now !!

Detail Products

• Tauntons Complete Illustrated Guide To Turning

Detail Reviews

Jul 30, 2011 06:06:06

5/16" Square X 6" Long Cobalt Tool Bit

5/16" Square X 6" Long Cobalt Tool Bit Reviews

Other Picture

5/16" Square X 6" Long Cobalt Tool Bit Feature

• Size: 5/16"

Ground, high speed steel. 5% COBALT toolbits will take more heat than M2 high speed toolbits.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 29, 2011 03:39:03

Sorby Micro Tool System Handle

Sorby Micro Tool System Handle Reviews

Other Picture

Sorby Micro Tool System Handle Feature

• Designed for the Sorby Micro Tool System

Extra handle for the Sorby Micro Tool System.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 28, 2011 05:51:04

Sorby Micro Boring Blade

Sorby Micro Boring Blade Reviews

Other Picture

This hollowing attachment for the Robert Sorby Modular Handle is perfect for initial waste removal while turning vases, cups, and more! Made from high speed steel, it features a 3/8" wide head, 1/4" wide shaft, and measures 2-3/4" long (not including tang).

Visit Store Now !!

Detail Products

Detail Reviews

Jul 26, 2011 01:57:03

PSI Woodworking Products LCJC8 8-1/2-Inch Bowl Finishing Chuck

PSI Woodworking Products LCJC8 8-1/2-Inch Bowl Finishing Chuck Reviews

Other Picture

PSI Woodworking Products LCJC8 8-1/2-Inch Bowl Finishing Chuck Feature

• Dedicated jaws already mounted to the chuck body
• Can finish bowls up to 8-1/2-Inch in diameter
• Single one hand key operation
• Pre-threaded to 1-Inch by 8TPI
• Contains an additional set of 8 grippers

Butter Cup, Mango

Visit Store Now !!

Detail Products

• Porter-Cable 5553 No. 20 Biscuits (1,000-Pack)

Detail Reviews

Jul 24, 2011 18:31:39

3/4 x 1" High Speed Steel Tool Bit Unground

3/4 x 1" High Speed Steel Tool Bit Unground Reviews

Other Picture

3/4 x 1" High Speed Steel Tool Bit Unground Feature

• Size: 3/4 x 1"
• Type: REX AA - HS
• Length: 5-1/2"

Our lowest priced toolbits. Made in USA. Closeout prices!

Visit Store Now !!

Detail Products

Detail Reviews

Jul 23, 2011 13:11:04

Robert Sorby #832H Fluted Parting Tool

Robert Sorby #832H Fluted Parting Tool Reviews

Other Picture

Robert Sorby #832H Fluted Parting Tool Feature

• #832H Fluted Parting Tool
• Size: 3/16'' (5mm)
• Overall Length: 18-1/2''
• Handle Length: 12''
• Robert Sorby

Fluted Parting Tool - This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibers to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut.

Size: 3/16" (5mm).
Code: 832H.
Overall Length: 18-1/2".
Handle Length: 12".

Visit Store Now !!

Detail Products

Detail Reviews

Jul 22, 2011 15:30:03

3/4" Robert Sorby #825H Diamond/Side Cut Scraper

3/4" Robert Sorby #825H Diamond/Side Cut Scraper Reviews

Other Picture

Sorby's Diamond/Side Cut Scraper is used on square bottomed boxes, where the end profile allows the tool to create a right angled juncture between the side wall and bottom. The 85 degree angle at the end prevents the tool from cutting the side wall and bottom at the same time. The Scraper has a 10" handle and is 18-1/2" long overall. Ash handle. High Speed Steel (HSS) blade. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 21, 2011 19:03:12

Acrylic Pen Buffing System Blue Buffing Rouge

Acrylic Pen Buffing System Blue Buffing Rouge Reviews

Other Picture

Acrylic Pen Buffing System Blue Buffing Rouge Feature

• Blue Buffing Rouge
• Great for polishing pens
• Designed by Master Pen Maker Barry Gross
• Replacement Rouge for SKU 151117

Replacement Blue Buffing Rouge to use with the Acrylic Pen Buffing System designed by Master Pen Maker Barry Gross. Finally, a system that will polish your pen blanks to perfection! This quick and easy two step buffing system will produce a completely scratch free finish on your acrylic blanks or CA finished blanks. Simply charge the cotton wheel with the specially formulated blue rouge, polish the pen blank for a few seconds then finish by buffing the blank on the flannel wheel for that ultimate wet look finish. Systems includes: #2MT for easy mounting to a #2MT headstock, 8mm mandrel, plastic bushings, one 4 cotton wheel, one 4 flannel wheel, and buffing compound.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 20, 2011 09:37:05

Spindle Gouge, 1/2"

Spindle Gouge, 1/2" Reviews

Other Picture

Spindle Gouge, 1/2" Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Fingernail medium grind
• Overall length 16-1/2"
• Ash handle

This 1/2" spindle gouge features a medium grind, with wing tips that have been ground back so the tool does not "catch" on the work piece. The "fingernail" grind is a popular edge with woodturners because it is easy to use and control and extremely versatile. Pull and push cuts, delicate shearing cuts, or full profile cuts can be made with ease. The medium grind lends itself to easy modification, allowing you to create profiles specifically suited to your turning requirements. Overall length 16-1/2".

Visit Store Now !!

Detail Products

Detail Reviews

Jul 19, 2011 11:03:04

Templar Cross Inlay Kit for Wall Street II

Templar Cross Inlay Kit for Wall Street II Reviews

Other Picture

Templar Cross Inlay Kit for Wall Street II Feature

• Step-by-step instructions included
• Crafted from Bethlehem Olive Wood, Holly, and colored and Maple
• Barrel cut from Olive Wood
• Shield inlays cut from Holly and a cross from Red colored and stabilized Maple
• Woodcraft Rating: Intermediate

Crafted from Bethlehem Olive Wood, Holly, and colored and Maple this kit consists of six pieces, a barrel cut from Olive Wood, shield inlays cut from Holly and a cross from Red colored and stabilized Maple.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 18, 2011 02:46:05

CROWN 1/2" Pro-PM Ellsworth Signature Bowl Gouge

CROWN 1/2" Pro-PM Ellsworth Signature Bowl Gouge Reviews

Other Picture

CROWN 1/2" Pro-PM Ellsworth Signature Bowl Gouge Feature

• The 'Elite' line of quality tools from Crown Hand Tools Ltd, Sheffield, England
• Lasts 4-5 times longer than conventional high speed tools
• Hardened to between 66-Degrees and 69-Degrees Rockwell
• Black ash handle
• Honing required before use

This 1/2-Inch 13-mm Powder Metallurgy Ellsworth Gouge is one of Crowns exclusive new range of elite Pro-PM turning chisels. Made from an advanced Powder Metal, the molten steel has been compressed and sintered, giving the tool a cutting edge which lasts up to four or five times that of a conventional High Speed Steel tool. The chisel is hardened to between 66-Degrees and 68-Degrees Rockwell, enabling the tools to have a vastly superior wear resistance, excellent grindability, superior toughness, a high working hardness and a high retention of hardness. The ergonomically designed stained black ash handle fitted to this tool makes the finished chisel unbeatable. 16-Inch 406-mm Black Ash Handle.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 16, 2011 14:13:04

HSS 8 Piece HSS Wood Lathe Chisel Set By Stone Mountain Turning Tools SM7084

HSS 8 Piece HSS Wood Lathe Chisel Set By Stone Mountain Turning Tools SM7084 Reviews

Other Picture

HSS 8 Piece HSS Wood Lathe Chisel Set By Stone Mountain Turning Tools SM7084 Feature

• 1/4 & 1/2" spindle gouge, 3/4" roughing gouge, 1" oval skew, 1" square nose scraper
• 1" round nose scraper, 3/16" parting tool and a 3/8" bowl gouge
• High speed hardened steel blades
• Stay sharper 6 times longer than carbon steel
• 16" Long Wooden Handles

From the woodturner just starting out to the experienced craftsman, this wood turning tool are sure to satisfy your needs. The hardwood handles are 16" long for better leverage and less fatigue when turning. The blades are made from high speed steel hardened to RC 62-64. This blade will stay sharp 6 time longer than carbon steel.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 15, 2011 13:30:04

Termite

Termite Reviews

Other Picture

Termite Feature

• Unique beveled circular cutting tip
• Great for difficult end grain cuts in hollowing operations
• High Speed Steel construction
• Clean shearing cuts
• Two interchangeable tips

Using a unique beveled, circular cutting tip, this revolutionary tool makes fast, deep, controlled hollowing cuts in end grain quickly and easily. You no longer have to be an expert wood turner to safely perform difficult end grain cuts in hollowing operations. The complete Termite kit includes a maple handled tool shank, #1 and #2 cutting tips, grinding jig, stone, and instructions. Machined from HSS, the Termite ring tip produces a clean shearing cut, which means you spend less time sanding and finishing and more time turning. Termite tips are held securely in the 1/2" diameter, maple handled tool shank by a set screw. The tool comes with two interchangeable ring tips, a #1 (5/16" dia.) and a #2 (7/16" dia.). Overall length is 23-1/2". Cutters can be quickly reground to original factory sharpness using the supplied grinding point and grinding jig block.

Visit Store Now !!

Detail Products

• Wixey WR300 Digital Angle Gauge
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• Turned Bowls Made Easy Dvd! From the Tree to the Table and Everything in Between!
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center

Detail Reviews

Jul 14, 2011 04:37:04

Turners Set of 8

Turners Set of 8 Reviews

Other Picture

Turners Set of 8 Feature

• High-speed steel blades
• Extra-long 16" hardwood handles
• Extra-long handles for greater control
• Woodcraft exclusive design
• Set of 8 woodturning tools

These high-quality turning tools are designed to meet the needs of any skill level woodturner, from beginner to demanding professional. High-speed steel blades are hardened to Rc 62-64 and set in extra-long 16" hardwood handles with brass ferrules. Extra length of the handles allows greater control and comfort for those long turning sessions. High-speed steel blades stay sharp up to six times longer than carbon steel. Available exclusively at Woodcraft, these tools represent great value and quality. 6-3/4" blades are set in 16" hardwood handles with brass ferrules. Turners set of 8 contains all the tools necessary for most turning projects. Set contains 1/4" spindle gouge, 1/2" spindle gouge, 3/4" roughing gouge, 1" oval skew chisel, 1" square nose scraper, 1" round nose scraper, 3/16" diamond parting tool and 3/8" bowl gouge. Honing required before use.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 13, 2011 07:05:09