Complete McNaughton System

Complete McNaughton System Reviews

Other Picture

Complete McNaughton System Feature

• Bowl turning system
• Make several bowls from one blank
• Multiple tools for different dimension bowls
• Specially designed tool post
• Protects against dangerous catches

Have you ever looked at the pile of wood shavings on the floor after turning a bowl from an expensive, highly figured burl and wished you could pick that wasted money up and turn it into another valuable turning? If you have, then the McNaughton System is the answer youve been looking for. This tool wont put the shavings back together again, it just avoids creating them in the first place! Using the McNaughton System youre able to make several bowls from one blank (green or dry) by actually removing bowl blanks from the center of the main blank with each bowl you turn. Not only do you save money, but you also save time since the resulting blank is already roughed out into a bowl shape. The Complete System contains three curved D2 HSS blades for cutting bowls with diameters from 4" to 14", one straight blade for basic coring, a handle, special 1" diameter tool post, three larger, thicker blades for releasing bowl centers up to 18" in diameter and extension handle. Besides turning wider bowls, the Complete System is also capable of turning out deeper blanks. The special tool post is designed to not only guide the curved tools through the blank, but it also holds the tool in the proper upright position and protects against dangerous catches. If you turn expensive or rare woods, the savings youll gain in both material and rough-out time from only a few "nests" of bowl blanks make this a must have tool.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 29, 2011 11:42:03

Diamond Parting Tool, 3/16"

Diamond Parting Tool, 3/16" Reviews

Other Picture

Diamond Parting Tool, 3/16" Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Ash handle
• Brass ferrule

This HSS 3/16" diamond parting tool will keep a sharpened edge about six times longer than carbon steel and resist "blued" softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21".

Visit Store Now !!

Detail Products

• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• Robert Sorby H0496 3/4" Roughing-Out Gouge

Detail Reviews

Jun 28, 2011 08:19:07

1/2" Easibeader

1/2" Easibeader Reviews

Other Picture

1/2" Easibeader Feature

• Unique yet simple tool to cutting a series of consistent and regular beads
• Easy replication of designs like bee-hive boxes, and honey dippers.
• Because of its shape the turner can move quickly from one bead to the next

Sorby Easybeaders are just what the name implies, the easiest way to produce a series of consistent and evenly spaced beads. Easibeaders work like conventional beading tools, but allow the turner to move quickly and efficiently from one bead to the next. Because you are forming half of the following bead each time you can move quickly along a series of beads without fear of catching and destroying a previous bead. Approximately 18" overall, instructions included.

Visit Store Now !!

Detail Products

• 1/4" Easibeader

Detail Reviews

Jun 26, 2011 18:27:06

Hunter #3 Full Swan Neck Carbide Hollower

Hunter #3 Full Swan Neck Carbide Hollower Reviews

Other Picture

Hunter #3 Full Swan Neck Carbide Hollower Feature

• Unique Hunter design
• High Quality carbide tip
• 25 - 30 times longer edge life than other similar tools
• Aluminum oxide finish prevents rust
• Strong metal shank prevents chatter and vibration

Tired of tough bowl blanks that quickly dull your edges? Have you hesitated to start on a burl because you know what the dirt in it will do to your tools? The Hunter Hollowing Tools, with their unique carbide cutters, are the solution to your problems. They will cut just about everything that you throw at them. Easy to control and smooth cutting. Great for beginners and welcome additions for advanced turners. When the tip dulls, just loosen and rotate slightly to a new razor sharp section. The tip is easy to replace when it eventually wears out. No grinding or lapping of the cutter is needed. High quality carbide tip provides an edge life 25-30 times longer than similar tools. Aluminum oxide finish on the tool holders prevents rust. Strong metal shanks minimize vibration and chatter. Tip wrench and instructions included. Easy to control and smooth cutting, the swans neck profile helps you reach those areas in a narrow opening vessel which are difficult or impossible to cut with a straight shafted tool.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 17:40:06

Ci3 Mini Finisher

Ci3 Mini Finisher Reviews

Other Picture

Ci3 Mini Finisher Feature

• These mini tools feature all of the same benefits and qualities as their full size parents. T
• You will find these tools invaluable for those smaller more intricate turnings, such as pens
• roughing, finishing and detail work.
• Easy grip handle

Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents. The cutters are designed so that you do not have to find the bevel when turning. Simply advance the tool slowly into the work piece and begin cutting straight in, or sweep the cutter from left to right, or right to left. You will find these tools invaluable for those smaller more intricate turnings, such as pens, ornaments and smaller bowls, but they are ideal for roughing, finishing and detail work.

Visit Store Now !!

Detail Products

• Ci2 Mini Rougher
• Ci3 Mini Finisher Replacement Carbide Cutter
• Ci4 Mini Detailer
• Ci1 Easy Rougher Replacement R2 Radius Cutter
• Ci2 Easy Rougher Mini Replacement Cutter

Detail Reviews

Jun 24, 2011 16:41:05

WoodRiver Deluxe Self Centering Pen and Bottle Stopper Drilling Vise

WoodRiver Deluxe Self Centering Pen and Bottle Stopper Drilling Vise Reviews

Other Picture

WoodRiver Deluxe Self Centering Pen and Bottle Stopper Drilling Vise Feature

• Comfortable T-handle design
• Clamping capacity from 0 - 2- 3/16"
• Repeatable drilling every time

The unique design of this vise assures the jaws clamp firmly and quickly and remain both parallel to each other and square to your drill press table. The jaw design eliminates off center holes in your pen blanks and increases your production while making a critical pen-making process easy. Featuring a comfortable T-handled grip and a fully adjustable heavy duty toggle clamp the Deluxe Self-Centering Pen and Bottle Stopper Vise features vertical "V" slots in the jaws which secure round or square blanks under your bit for perfect, repeatable drilling. Just clamp a pen or bottle stopper blank in the vise, center under your drill bit and clamp the vise base to your table. The vise will remain centered on every subsequent pen blank up to 1- 1/2" square, (2- 3/16" diagonal).

Visit Store Now !!

Detail Products

• Big Horn 14515 Pen Turning Press

Detail Reviews

Jun 23, 2011 16:38:17

1/8'' Robert Sorby #831H Standard Parting Tool

1/8'' Robert Sorby #831H Standard Parting Tool Reviews

Other Picture

1/8'' Robert Sorby #831H Standard Parting Tool Feature

• 1/8'' Robert Sorby Standard Parting Tool
• #831H
• Size:1/8''-3mm, Overall length: 13-1/2'', Handle length: 8-1/2''
• Makes for a fine detailing tool - perfect for beads and fillets

Standard Parting Tool - Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets. Size:1/8''-3mm, Code: #830H, Overall length: 13-1/2'', Handle length: 8-1/2''.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 03:26:04

1/2" Spindle Gouge

1/2" Spindle Gouge Reviews

Other Picture

1/2" Spindle Gouge Feature

• High-speed steel blade
• Extra-long 16" hardwood handle
• Extra-long handle for greater control
• Woodcraft exclusive cesign
• Brass ferrule

These high-quality turning tools are designed to meet the needs of any skill level woodturner, from beginner to demanding professional. High-speed steel blades are hardened to Rc 62-64 and set in extra-long 16" hardwood handles with brass ferrules. Extra length of the handles allows greater control and comfort for those long turning sessions. High-speed steel blades stay sharp up to six times longer than carbon steel. Available exclusively at Woodcraft, these tools represent great value and quality. 6-3/4" blades are set in 16" hardwood handles with brass ferrules. Honing required before use.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 21, 2011 03:20:05

Rockler 1'' Self-Adhesive Discs (120 pk.)

Rockler 1'' Self-Adhesive Discs (120 pk.) Reviews

Other Picture

Rockler 1'' Self-Adhesive Discs (120 pk.) Feature

• Available in 1/2'', 1'', 2'', and 3'' diameters.
• Features the same adhesive auto-makers use to mount rear-view mirrors.

More efficient and less frustrating than turner's tape, these handy double-sided adhesive discs peel and stick in no time without wasting material! They're perfect for attaching several workpieces for simultaneous cutting, as well as setting up templates for router inlays, jig mounting, pattern routing and more. The bigger discs (2" and 3" diameters) even work for securing small bowl blanks for light-duty turning. These discs feature the same adhesive auto-makers use to mount rear-view mirrors, so you can have ultimate confidence in the strength of your setups. Available in 1/2", 1", 2", and 3" diameters to fit the needs of any project. For maximum bonding strength, stock must be flat and dry.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 19, 2011 16:38:04

2'' 60 Grit Sandpaper for the Sorby Sandmaster, 10pk

2'' 60 Grit Sandpaper for the Sorby Sandmaster, 10pk Reviews

Other Picture

Replacement hook and loop sandpaper for the Sorby Sandmaster (shown, sold separately, Rockler #27711). Available in 2" and 3" diameters and 60, 180, 240 and 400 grit papers. Note: The Sorby Sandmaster comes with a 2" standard head. Optional 3" head sold separately (Rockler #26888).

Visit Store Now !!

Detail Products

• 2'' 180 grit sandpaper for Grex AOS368 2'' Random Orbital Sander (10 pk.)
• GREX AOS368 2-Inch 105-Degree Angle Random Orbital Sander
• 2'' 400 grit sandpaper for Grex AOS368 2'' Random Orbital Sander (10 pk.)
• Sorby Sandmaster

Detail Reviews

Jun 18, 2011 17:34:04

Robert Sorby Hollowmaster 10''

Robert Sorby Hollowmaster 10'' Reviews

Other Picture

Turn long thin vessels and vases through a narrow opening with ease and accuracy. 10" size.

The Robert Sorby Hollowmaster has a flat underside which provides exceptional control and stability when hollowing and is suitable for end grain and bowl work. It is supplied with two interchangeable tips for hollowing and scraping.

Unlike most conventional hollowing tools, the unique Hollowmaster comes with a meaty 3/4" flat surface. When laid on the tool rest, this gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature but removing wood with ease. It's swan neck design means that the Hollowmaster can reach those spots that are often difficult to reach.

The Hollowmaster comes with a swiveling hollowing cutter and a full round scraper cutter for fine finishing. Both are easily sharpened with a diamond file and can be replaced when need be.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 17, 2011 20:25:04

Robert Sorby #RS204 RS2000 Extension Shank

Robert Sorby #RS204 RS2000 Extension Shank Reviews

Other Picture

Extra extension shank for Sorby's RS2000 Hollowing System. 11" long. All steel. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 15, 2011 09:42:03

Robert Sorby #973 Thread & Sizing Gauge

Robert Sorby #973 Thread & Sizing Gauge Reviews

Other Picture

Ideal for box makers, this gauge takes all the guesswork out of dimensioning projects when cutting threads on the lathe. With the gauge set at the unmarked anvil this creates a 1:1 correlation between the measuring faces and facilitates accurate push fits. The other three anvils are marked 10, 16, and 20, which relates to the most common tpi (threads per inch) used by thread cutters. The gauge has a built-in compensation factor to ensure a perfect, thight thread fit between the internal and external diameters everytime. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 14, 2011 10:10:04

2-1/2" Robert Sorby #9725 Vessel Caliper

2-1/2" Robert Sorby #9725 Vessel Caliper Reviews

Other Picture

Specifically deisgned for internal and thin wall measuring of bowls, urns, goblets, etc. The straight arm of the caliper makes it especially useful for checking narrow vessels. Sizes can be read at either end. Calipers have plated steel legs for corrosion resistance and and have a friction fit adjustment point. Size refers to the approximate length from tip of the straight leg to the center of the set screw. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 13, 2011 08:49:06

PSI Woodworking Products DIAMOND4 4-Piece Sharpening Set

PSI Woodworking Products DIAMOND4 4-Piece Sharpening Set Reviews

Other Picture

PSI Woodworking Products DIAMOND4 4-Piece Sharpening Set Feature

• Flat sharpener: 6-Inch long by 1-Inch wide
• Round sharpener: 4-Inch long, 1/8-Inch to 3/8-Inch diameter
• Narrow cone sharpener: 6-Inch long, 3/8-Inch to 3/4-Inch diameter
• Wide cone sharpener: 8-Inch long, 3/4-Inch to 1-1/4-Inch diameter
• Makes it easy to keep your cutting tools sharp

PSI Woodworking Products DIAMOND4, 4-Piece Sharpening Set. Keep your chisels razor sharp with this diamond sharpening set. Use these pieces to easily sharpen tool steel, high speed steel, and carbide-edge tools. The diamond surfaces sharpen smoothly and quickly with a minimum of hand pressure. The cone-shaped sharpeners are ideal for sharpening contoured lathe and carving chisels.Flat sharpener: 6-Inch long by 1-Inch wideRound sharpener: 4-Inch long, 1/8-Inch to 3/8-Inch diameterNarrow cone sharpener: 6-Inch long, 3/8-Inch to 3/4-Inch diameterWide cone sharpener: 8-Inch long, 3/4-Inch to 1-1/4-Inch diameterMakes it easy to keep your cutting tools sharp

Visit Store Now !!

Detail Products

• PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center

Detail Reviews

Jun 12, 2011 13:14:03

Cross Inlay Kit for Wall Street II

Cross Inlay Kit for Wall Street II Reviews

Other Picture

Cross Inlay Kit for Wall Street II Feature

• Step-by-step instructions included
• Crafted from colored and stabilized Maple
• Consists of one barrel and 24 individually numbered cross shaped pieces
• Woodcraft Rating: Easy
• Colors may vary

This precision laser inlay kit consists of 25 components. One barrel and 24 individually numbered cross shaped pieces. Colors may vary. Optional colors will be either a Blue barrel with Gold crosses or a Gold barrel with Blue crosses.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 11, 2011 09:05:04

5/8" Square X 4-1/2" Long M2 High Speed Steel Ground Tool Bit

5/8" Square X 4-1/2" Long M2 High Speed Steel Ground Tool Bit Reviews

Other Picture

5/8" Square X 4-1/2" Long M2 High Speed Steel Ground Tool Bit Feature

• Size: 5/8"

Ground, high speed steel. M2 HS steel is a good general purpose toolbit.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 10, 2011 13:25:04