5/16" Square X 2-1/2" Long M2 High Speed Steel Ground Tool Bit

5/16" Square X 2-1/2" Long M2 High Speed Steel Ground Tool Bit Reviews

Other Picture

5/16" Square X 2-1/2" Long M2 High Speed Steel Ground Tool Bit Feature

• Size: 5/16"

Ground, high speed steel. M2 HS steel is a good general purpose toolbit.

Visit Store Now !!

Detail Products

• 1/4" Square X 2-1/2" Long M2 High Speed Steel Ground Tool Bit
• 3/8" Square X 3" Long M2 High Speed Steel Ground Tool Bit

Detail Reviews

Jun 01, 2011 08:49:03

Sorby Sovereign Spindle Gouge 1/2 in

Sorby Sovereign Spindle Gouge 1/2 in Reviews

Other Picture

Sorby Sovereign Spindle Gouge 1/2 in Feature

• A must in the tool kit of every bowl turner
• Milled from round bar, giving both mass and stability
• These tools are ideal for making bowls
• They can produce either massive profiling cuts or delicate as neccessary.

Sorby Sovereign Spindle Gouge 1/2" to be used with the Sorby Sorvereign System

Visit Store Now !!

Detail Products

• Sorby Sovereign Fingernail Bowl Gouge 1/2 in

Detail Reviews

May 31, 2011 01:32:04

Robert Sorby #RS130C Midi Round Cutter

Robert Sorby #RS130C Midi Round Cutter Reviews

Other Picture

High Speed Steel replacement tip for Sorby Hollowing Tools. Used for finish cuts on hollow forms. Cutter is easily sharpened with a diamond file and can be replaced as needed. Works with the following Sorby turning tools: Midi Hollowmaster Tool - Handled Sovereign Midi Hollowmaster Tool - Blade May work with other Sorby tools not listed here. Be sure to check the instructions for the specific tips your particular tool will accept. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

May 30, 2011 00:18:13

Robert Sorby#868 Micro Tool Multi Scraper Blade

Robert Sorby#868 Micro Tool Multi Scraper Blade Reviews

Other Picture

High quality high speed steel (HSS) tipped Multi-Scraper Scraper Blade for Sorby's Micro Tool System. Made for shaping and smoothing small hollow forms. The 3/8" diameter wide blade has a working length of approximately 4-3/8". Includes scraper tip shown. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

May 29, 2011 00:56:42

Beading and Parting, 3/8"

Beading and Parting, 3/8" Reviews

Other Picture

Beading and Parting, 3/8" Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Ash handle
• Brass ferrule

This HSS 3/8" beading and parting tool will keep a sharpened edge about six times longer than carbon steel and resist "blued" softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21".

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 21:36:12

Pinnacle Cryogenic Bowl Turning Set

Pinnacle Cryogenic Bowl Turning Set Reviews

Other Picture

Pinnacle Cryogenic Bowl Turning Set Feature

• Sub-zero cryogenically treated blades
• Manufactured in Sheffield, England
• European ash handles
• Woodcraft exclusive design
• Overall tool lengths 17" to 23"

Whether you are a professional production turner or a hobbyist with limited shop time, these cryogenically treated tools stay sharp two to three times longer than standard M-2 high-speed steel tools so you are turning more and sharpening less! Manufactured in Sheffield exclusively for Woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools without the cost of powdered metal tools. The cryogenic treatment process uses sub-zero temperatures, down to -300 degrees F, to modify the micro-structure of the steel into a more uniform grain structure that allows you to hone to a fine edge without chipping. Also, your cutting edge is more durable and more resistant to wear. Each tool is mounted in a European ash handle. Overall tool lengths range from 17" to 23". Three-piece set includes 3/8" fingernail grind bowl gouge, 1" round nose scraper and 3/16" diamond parting tool.

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 01:05:32

Skew, 3/4"

Skew, 3/4" Reviews

Other Picture

Skew, 3/4" Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Ash handle
• Brass ferrule

This HSS 3/4" skew will keep a sharpened edge about six times longer than carbon steel and resist "blued" softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21".

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 23:10:06

Spindle Gouge, 3/4"

Spindle Gouge, 3/4" Reviews

Other Picture

Spindle Gouge, 3/4" Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Ash handle
• Brass ferrule

This HSS 3/4" spindle gouge will keep a sharpened edge about six times longer than carbon steel and resist "blued" softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21".

Visit Store Now !!

Detail Products

Detail Reviews

May 24, 2011 19:41:04

American Bald Eagle Inlay Kit Blue Barrel for Wall Street II

American Bald Eagle Inlay Kit Blue Barrel for Wall Street II Reviews

Other Picture

American Bald Eagle Inlay Kit Blue Barrel for Wall Street II Feature

• Step-by-step instructions included
• Crafted from colored and stabilized Maple
• Includes One Blue barrel, one Natural Maple eagle head cutout, six Brown feather, one Yellow beak
• Woodcraft Rating: Advanced
• Complete it with a finish of your choice

This precision laser inlay kit consists of 9 components. One Blue barrel, one Natural Maple eagle head cutout, six Brown feather, and one Yellow beak.

Visit Store Now !!

Detail Products

Detail Reviews

May 23, 2011 11:17:29

Robert Sorby Micro Spindle Set

Robert Sorby Micro Spindle Set Reviews

Other Picture

With a durable aluminum handle and three interchangeable blades,this modular set quickly transitions from one turning tool to the next. Perfect for pen turning and other small spindle work! It includes a 1/2" gouge, 1/4" skew and 5/32" beading/parting tool to produce beautiful, intricate pieces. As part of the Robert Sorby modular micro tool system, the included handle accepts all other Sorby Micro attachments.Includes:* Aluminum handle (5-3/4" long) * All-purpose gouge blade (1/2" W)* Skew blade (1/4" W)* Beading and parting blade (5/32" W)* (2) allen wrenches* Instruction leaflet

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 07:46:04

Sorby Sovereign Threaded Coupler

Sorby Sovereign Threaded Coupler Reviews

Other Picture

Sorby Sovereign Threaded Coupler Feature

• Several optional extras with the Sovereign System
• Handles are beautiful balanced some turners like a bit of extra weight for control
• Counterweight to fit both handles
• Can be used either on the side or top of the tool in use

There a several optional extras with the Sovereign System. Whilst the handles are beautiful balanced some turners like a bit of extra weight for control and hence there is a counterweight to fit both handles. For extra control a side handle is also offered. This can be used either on the side or top of the tool in use. For those requiring an even longer handle there is also a threaded coupler which enables the turner to fit two handles together for extra leverage.

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 09:11:06

4'' Face Plate for Lathe

4'' Face Plate for Lathe Reviews

Other Picture

Mount the plate to a wide variety of lathe spindles just by changing the threaded insert (sold separately). They fit Delta, Jet and other lathes. Great for small to medium sized projects. Requires one of the threaded inserts below to fit your lathe. Threaded inserts sold separately.

1'' X 8 TPI Insert (Rockler #22432)
3/4'' X 16 TPI Insert (Rockler #22439)

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 07:37:04

Hunter #3 Carbide Hollowing Tool

Hunter #3 Carbide Hollowing Tool Reviews

Other Picture

Hunter #3 Carbide Hollowing Tool Feature

• Unique Hunter design
• High quality carbide tip
• 25 - 30 times longer edge life than other similar tools
• Aluminum oxide finish prevents rust
• Strong metal shank prevents chatter and vibration

Tired of tough bowl blanks that quickly dull your edges? Have you hesitated to start on a burl because you know what the dirt in it will do to your tools? The Hunter Hollowing Tools, with their unique carbide cutters, are the solution to your problems. They will cut just about everything that you throw at them. Easy to control and smooth cutting. Great for beginners and welcome additions for advanced turners. When the tip dulls, just loosen and rotate slightly to a new razor sharp section. The tip is easy to replace when it eventually wears out. No grinding or lapping of the cutter is needed. High quality carbide tip provides an edge life 25-30 times longer than similar tools. Aluminum oxide finish on the tool holders prevents rust. Strong metal shanks minimize vibration and chatter. Tip wrench and instructions included. #3 Hunter Tool is ideal for turning pens, lidded boxes, goblets, and other small diameter work. Removes wood quickly, efficiently, and cleanly prior to sanding operations. 3/8 diameter cutter is mounted on a 4-3/4" long, 3/8" diameter shank; 19-3/4" overall tool length.

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 01:03:04

Robert Sorby #804H Mushroom Tool

Robert Sorby #804H Mushroom Tool Reviews

Other Picture

Uses a standard Sorby shaft and handle to hold a cutter particularly suitable for undercutting the cap of mushroom shaped projects, but may be adapted for undercutting other items. Set includes Shaft & Handle and a mushroom cutter. Handle and shaft will also accept a variety of other cutters, including a Mini Round Nose, Rim, Side & Face, and Side & End Box, giving you multiple possibilites once you have it. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

May 16, 2011 18:21:05

Sorby Micro Swan Neck Hollowing Blade

Sorby Micro Swan Neck Hollowing Blade Reviews

Other Picture

Sorby Micro Swan Neck Hollowing Blade Feature

• Work primarily on mini or midi lathes or those who specialize in miniature pieces.
• Use for pen turning
• Highly popular with woodturners the world over.

Robert Sorby continues to lead the way in innovation with the introduction of the all new Micro Tool System. Turning tools specifically designed for small projects, but perfectly capable of being used on larger projects. The system features beautifully engineered burgundy anodized aluminum handles and is comprised of four separate sets of tools.

Visit Store Now !!

Detail Products

Detail Reviews

May 15, 2011 17:54:06

Sorby Micro Round Scraper Blade

Sorby Micro Round Scraper Blade Reviews

Other Picture

Sorby Micro Round Scraper Blade Feature

• Work primarily on mini or midi lathes or those who specialize in miniature pieces.
• Use for pen turning
• Highly popular with woodturners the world over.

Robert Sorby continues to lead the way in innovation with the introduction of the all new Micro Tool System. Turning tools specifically designed for small projects, but perfectly capable of being used on larger projects. The system features beautifully engineered burgundy anodized aluminum handles and is comprised of four separate sets of tools.

Visit Store Now !!

Detail Products

Detail Reviews

May 14, 2011 16:51:08

JET 709163 Mini Lathe Turning Set, 5-Piece

JET 709163 Mini Lathe Turning Set, 5-Piece Reviews

Other Picture

JET 709163 Mini Lathe Turning Set, 5-Piece Feature

• Chisels hold an edge six times longer than regular carbon steel chisels
• Constructed using M2 High speed steel for razor-sharp cutting
• Tempered to Rockwell hardness 62/64 for razor-sharp cutting
• Ergonomically designed rosewood handles with heavy-duty solid brass ferrules
• 3-3/4-inch high-speed steel blades

1/8" Gouge 1/4" Gouge 1/16" PartingTool 1/4" Skew Chisel 1/4" Round Nose Scraper

Visit Store Now !!

Detail Products

• Tauntons Complete Illustrated Guide To Turning
• JET JML 1014VSI 10-Inch-by-14-Inch Variable Speed Indexing Mini Lathe
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• JET JML 1014I 10 Inch X 14 Inch Indexing Mini Lathe
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws

Detail Reviews

May 12, 2011 19:56:08